Eaton Remote Power Panel

For all of our products, we typically can get you better than MSRP pricing. Ask us for a quote so we can get you the discount.

Get unmatched power distribution in a highly compact footprint with Eaton’s Remote Power Panel (RPP). This highly customizable unit offers a choice of standard or rack depth cabinets with up to four-panel boards, each with 42 circuit breakers. Big power is coupled with extensive monitoring in the RPP, down to the branch circuit level, thanks to the loaded Energy Management System to ensure easy and effective power management.

*Ask us for a quote for discounted pricing.

Add to wishlist

Category: PDU

Description
Reviews (0)

For all of our products, we typically can get you better than MSRP pricing. Ask us for a quote so we can get you the discount.

*Ask us for a quote for discounted pricing.

Reduce installation time and save startup costs

Standard top and bottom entry, and free standing structure, along with up to 168 factory-installed configurable branch breakers allows for more flexible options and reduced startup costs.

Extend branch circuit monitoring with an integrated Emergency Management System

Made to take advantage of white space

With two foot prints available — single raised floor tile footprint (24″ x 24″) or standard rack depth footprint (24″ x 42″) — the RPP integrates seamlessly into data center design

Product snapshot

GENERAL

208/120V or 400V versions, 3 phase

Standard or rack depth cabinet sizes

Direct connection to panelboard breakers (225A or 400A)

DISTRIBUTION

225A or 400A column panelboards

Front: 2 panelboards

Rear: 2 panelboards

Up to 168 pole positions

Factory-installed breakers

Dimensions, W x D x H

RPP 24″ x 24″ x 80″

RACK RPP 24″ x 42″ x 80″

Electrical characteristics

INPUT/OUTPUT

208/120V: 3 phase, 4 wire + ground

400V: 3 phase, 4 wire + ground

INPUT RATINGS

450/900A

INPUT TYPE

Single feed into main lug (up to 4)

Dual feed into main lug (up to 4)

Direct connection to panelboard main breaker

FREQUENCY

60 Hz

NEUTRAL RATING

200%

Power distribution, 208/120V

PANELBOARDS

Up to (4) 42-pole panels

(2) panels in front & (2) panels in rear

PANELBOARD OPTIONS

Cutler-Hammer (Bolt-on or Plug-in) or SquareD panels (225A or 400A main breakers)

80% or 100% rated

BRANCH BRAKERS

Factor-installed branch circuit breakers

Standards

NEMA

UL60950

CSA60950

Options

Energy Management System
High kAIC Panel main breakers
100% rated sub-feed breakers (CH)
100% rated panel main breakers (CH)
Branch circuit monitoring
Floor stands: seismic rated (12″, 18″, 24″, 30″, 36″ & 48″)
Isolated gound (standard)
Distributed cables (whips)
Clear Plexiglas doors

Isolated barrier for dual feed input and direct connect
Top or bottom panelboard installation
Extra knock-out, incoming and conduit plates
Transient suppression plate
Surge protection device (100 or 200kA)
Low voltage control junction box
Mesh rack doors
4 building alarm inputs (N/O or N/C)

Energy Management System

Monitored parameters

Input voltage (L-L & L-N)
Input current (A, B & C phases)
Output voltage (L-L & L-N)
Output current (A, B & C phases)
Output neutral current
System ground current
kVA, kW, Hz
Monthly, yearly, total kWH
Output voltage THD (all phases)
Power factor (lead/lag indicator)
Output current % (A, B & C phases)

Load profiling

Captures highest and lowest reading on a monthly basis with trend information over the last 24 hours.

Input/output voltage
Input/output current
Input/output frequency
Input/output power factor
Input/output kVA
Input/output voltage THD
Ground current
Neutral current

Warnings/Alarms

Input/output over- & under-voltage
Input/output over- & under-frequency
Input/output phase rotation
Input/output voltage THD
Input/output current THD
Output overload (3 levels)
Building alarms (4 programmable)
Summary alarm
Communication fault

Reviews

There are no reviews yet.