Energy Management System (EMS) Upgrade Kit

For all of our products, we typically can get you better than MSRP pricing. Ask us for a quote so we can get you the discount.

Avoid the trouble caused from tripped circuit breakers with Eaton’s Energy Management System (EMS), which comes integrated into three-phase power distribution units and remote power panels. into your power distribution equipment. The EMS upgrade kit enables you to extend branch circuit monitoring to equipment from Eaton or any other manufacturer. Unify the management of diverse, multi-vendor power distribution systems while receiving real-time and historic information for peak-load planning, troubleshooting and colocation billing.

*Ask us for a quote for discounted pricing.

Add to wishlist

Category: PDU

Description
Reviews (0)

For all of our products, we typically can get you better than MSRP pricing. Ask us for a quote so we can get you the discount.

*Ask us for a quote for discounted pricing.

Make your systems work together

Unify management of diverse, multi-vendor power distribution systems to streamline monitoring with split core CTs that easily clamp over wired branch circuits.

Extend branch circuit monitoring

A field install-able EMS upgrade kit brings the same level of monitoring to non-Eaton equipment.

Three tiers of visibility in one unit

Monitor power conditions on individual breakers, panel or at the equipment level.

Meters and load profiling points:

Input1 V12 min/max
Input1 V23 min/max
Input1 V31 min/max
Input1 ACUV total time
Input1 I1 min/max (with optional Main CTs installed)
Input1 I2 min/max (with optional Main CTs installed)
Input1 I3 min/max (with optional Main CTs installed)
Input1 V12 THD max
Input1 V23 THD max
Input1 V31 THD max
Input1 frequency min/max
Input1 kVA min/max (with optional Main CTs installed)
Input1 PF min/max (with optional Main CTs installed)
Input2 V12 min/max

Input2 V23 min/max
Input2 V31 min/max
Input2 ACUV total time
Input2 I1 min/max (with optional Main CTs installed)
Input2 I2 min/max (with optional Main CTs installed)
Input2 I3 min/max (with optional Main CTs installed)
Input2 V12 THD max
Input2 V23 THD max
Input2 V31 THD max
Input2 frequency min/max
Input2 kVA min/max (with optional Main CTs installed)
Input2 PF min/max (with optional Main CTs installed)
GND I min/max
NEU I min/max

Event logging

Input1 AC over voltage
Input1 AC under voltage
Input1 under or over frequency
Input2 AC over voltage
Input2 AC under voltage
Input2 under or over frequency
Building alarm 1
Building alarm 2
Building alarm 3
Building alarm 4
Input1 overload (four levels per phase, with optional Main CTs installed)

Input2 overload (four levels per phase, with optional Main CTs installed)
Input1 phase rotation error
Input2 phase rotation error
Configuration error
ALM High_Input 1_THD (per phase alarm) current or voltage
ALM High_Input 2_THD (per phase alarm) current or voltage
ALM Neutral_overload_warning (per panel)
Neutral_overload (per panel)
Ground_Current_Warning (per panel)
Ground_Current_Overload (per panel)

DSP, LCD and Power Xpert Gateway 1000 card firmware are user-upgradeable

Individual panel monitoring

The following parameters are configurable:

Panel number
Panel name
Nominal input voltage
Nominal input frequency
System kVA
CTs present
L-L or L-N input setting
Main CT ratios
Calibration of input, output
Ground and neutral CTs
Calibration of voltage
Breaker rating
Breaker warning level
Breaker type

Monitoring parameters

RMS: V1, V2, V3, V12, V23, V13, I1, I2, I3
Average: Vavg, kW, kVA, PF
Load: monthly kWh, yearly kWh, total kWh
Percentage: I1%, I2%, I3%, Itotal% (percent load)
Max: Vmax, Imax

Main panel board metering alarms

Panel or subfeed break OL warning
Panel or subfeed breaker OL alarm

Branch circuit or subfeed breaker monitoring – up to 42 per panel

User can easily add panel breakers

Individual branch circuit configurables

Breaker number
Breaker rating
Breaker warning level
Breaker overload level
Breaker type

Monitored parameters

Current: RMS and percentage
Average: kW, kVA, PF
Load: monthly kWh, yearly kWh, total kWh
Max: amperage, kW
Min: PF

Individual branch circuit alarms (for each breaker)

Breaker current warning
Breaker current overload

Environmental parameters (available via Eaton Power Xpert Gateway 1000 communication card)

Ambient temperature calculated in metric or standard (°F or °C)
Ambient humidity (%)

User interfaces

Eight-line by 40-character LCD with five soft keys for menu navigation
Four indicator lamps and alarm horn

Communications

Power Xpert Gateway 1000 communications card
- Built-in Web and SMTP server
- Supports Modbus TCP, SNMP and NTP protocols
- (2) Isolated RJ-45 ethernet ports for redundancy
DB-9 serial connection for software configuration tool

Environment and safety

OPERATING TEMPERATURE

0°C to 40°C (32°F to 104°F)

NON-OPERATING TEMPERATURE

-55°C to 85°C (-67°F to 185°F)

RELATIVE HUMIDITY

0-95% non-condensing

OPERATING ALTITUDE

Up to 6,600 ft (2,000m) above mean sea level

NON-OPERATING ALTITUDE

Up to 40,000 ft (12,200m) above mean sea level

AUDIBLE NOISE

<40 dBA, excluding alarms

EMI

FCC 47, part 15 for Class A devices

CISPR 22/EN 55022 Class A

ELECTROSTATIC DISCHARGE (ESD)

IEC 61000-4-2 up to 8 kV pulse without damage and no adverse effect to critical load

AGENCY MARKING

UL 61010-1

CSA C22.2 No. 61010-1

CE Mark

IEC 61010-1:2001-02

Reviews

There are no reviews yet.